Use OpenSpot MMDVM protocol for DMR+ or Brandmeister

The new firmware v.85 for OpenSpot adds as new, the MMDVM network protocol.

This connector is intended for DMR+ network, but works also in Brandmeister.

For connect to DMR+ network with MMDVM protocol:

1- Type Connectors menu.

2- On Edit connector, select Homebrew/MMDVM connector.

3- Type Switch to selected.

4- On DMR/Homebrew/MMDVM, mark MMDVM option on the Protocol section.

5- On DMR/Homebrew/MMDVM, choose our favorite master server in the Server section.

6- Add our callsign and personal DMR id,

7- If need, add a reflector number or TG number for autoconnect in start.

8- Type Save.

9- That’s all !!

openspot-mmdvm

For connect to Brandmeister network with MMDVM protocol:

The web interface of OpenSpot is intended for use Homebrew protocol, but works also in MMDVM.

Try on this order:

1- Type Connectors menu.

2- On Edit connector, select Homebrew/MMDVM connector.

3- Type Switch to selected.

4- On bottom right of page mark Advanced mode option.

5- On DMR/Homebrew/MMDVM, mark Homebrew option on the Protocol section.

6- On DMR/Homebrew/MMDVM, choose our favorite master server in the Server section.

7- On DMR/Homebrew/MMDVM, change the port from 62030 to 62031.

8- Add our callsign and personal DMR id,

9- If need, add a reflector number or TG number for autoconnect in start.

10- Important !! On DMR/Homebrew/MMDVM, mark MMDVM option on the Protocol section.

11- Type Save.

12- That’s all !!

mmdvm-bm

Works also in HBLink’s servers????

Try…

73’s!

Sergi (EA3HKB)