Use OpenSpot MMDVM protocol for DMR+ or Brandmeister

The new firmware v.85 for OpenSpot adds as new, the MMDVM network protocol.

This connector is intended for DMR+ network, but works also in Brandmeister.

For connect to DMR+ network with MMDVM protocol:

1- Type Connectors menu.

2- On Edit connector, select Homebrew/MMDVM connector.

3- Type Switch to selected.

4- On DMR/Homebrew/MMDVM, mark MMDVM option on the Protocol section.

5- On DMR/Homebrew/MMDVM, choose our favorite master server in the Server section.

6- Add our callsign and personal DMR id,

7- If need, add a reflector number or TG number for autoconnect in start.

8- Type Save.

9- That’s all !!

openspot-mmdvm

For connect to Brandmeister network with MMDVM protocol:

The web interface of OpenSpot is intended for use Homebrew protocol, but works also in MMDVM.

Try on this order:

1- Type Connectors menu.

2- On Edit connector, select Homebrew/MMDVM connector.

3- Type Switch to selected.

4- On bottom right of page mark Advanced mode option.

5- On DMR/Homebrew/MMDVM, mark Homebrew option on the Protocol section.

6- On DMR/Homebrew/MMDVM, choose our favorite master server in the Server section.

7- On DMR/Homebrew/MMDVM, change the port from 62030 to 62031.

8- Add our callsign and personal DMR id,

9- If need, add a reflector number or TG number for autoconnect in start.

10- Important !! On DMR/Homebrew/MMDVM, mark MMDVM option on the Protocol section.

11- Type Save.

12- That’s all !!

mmdvm-bm

Works also in HBLink’s servers????

Try…

73’s!

Sergi (EA3HKB)

Connect via internet our OpenSpot

Hello from Barcelona, Catalonia.
I discovered the methode for make direct connection to our OpenSpot web interface, via internet.
1- In the Settings/Network zone, change Ip Configuration Mode from DHCP to Static.

2- Type a configuration similar to this:

openspot

3- Type the SAVE button

4- In our internet router make a NAT bridge from a personal internet side TCP port, to a internal TCP 80 port, using the internal Static IP, wrote in the OpenSpot configuration, in my case, 192.168.1.4

5- Open our web browser and type the url:

http://our_internet_address:our_router_opened_port/openspot.html_gz#login

Example:

http://myweb.no-ip.org:12567/openspot.html_gz#login

6- And is all !!! Manage our OpenSpot via internet.

 

Important!!

At this moment, if use a address similar to this:

http://myweb.no-ip.org:12567

This NOT works, because in connection, the web interface of the OpenSpot change our internet IP to the internal IP, in my case 192.168.1.4 and lost the connection.

 

For LOCAL home network connection, use directly the OpenSpot address, in my case:

http://192.168.1.4

 

73’s to all!!!

Sergi. EA3HKB

 

Nou reflector D-Star Multiprotocol XLX714

He instal·lat un nou Reflector D-Star Multi-protocol XLX714.
Accepta connexions tipus Dextra, Dplus i DCS.
Està pensat per donar cobertura al territori de Catalunya.
Si et vols afegir, estem al XRF714 C.
Disposeu del fitxer xref.txt, que conté el llistat de Reflectors XRF (Dextra) per actualitzar el vostre programari actual.
Simplement canviant-li el nom, us servirà per programaris com DV4mini, IrcddbGateway o similar.

Com funciona la modulació de C4FM SystemFusion de Yaesu?

Bon dia!

Realitzant recerca per internet, he trobat un document on s’explica com funciona la modulació digital C4FM del SystemFusion de Yaesu.

Està molt extensament explicat i detallat tot el procés que té el senyal en codificació i de-codificació.

Entenc que amb aquesta informació, el sistema SystemFusion de Yaesu deixa de ser un sistema tancat i propietari, donat que han publicat com funciona.

Si voleu baixar el fitxer, cliqueu AQUI.

Bona ràdio.

1 2 3 4